If you are reading this, I assume you have decided that Polyurea Spray Coatings are the proper option for your particular project. Polyurea Spray Coating solutions are not only waterproof but also resistant to external elements.

Most people will usually think they can apply the coating themselves, even if they have never worked with this type of chemical before. However, when they start applying the spray coating, they quickly realize that something is wrong. The Polyurea Spray Coating does not come out evenly, and it does not seem to stick well to the surface. This is a prevalent problem inexperienced applicators will run into.

Not only do we offer training when you become an applicator, but we also have technicians available at all times to help our customers get a perfect coating the first time and each time after that. To help you get a uniform and effective coating on your first try, follow these guides:
 
Fill Gaps: Before implementing the coating, you should check that there are no gaps. If so, fill in the gap and make sure the surface is not damaged.

Preparation Is Key: This is the main reason why the coating applied by the applicator fails. If you do not set up the surface correctly, the coating will not stick well. Before preparing your equipment, look at the surface you are going to spray. Make sure it is free of oils, corrosives, and other elements that can affect the coating. With a clean and flat surface, you shouldn't have problems applying the coating.


Read Guides: You may think this is an obvious suggestion, but following the guides won't cause the possibility of a faulty coating. When the guides are too complicated, we recommend that you contact our support staff. You should make sure you understand the process before applying the Polyurea spray coating. You can also check your equipment and materials to make sure everything is ready for the task ahead.

Spray Smoothly & Slowly: Some things can happen when spraying, such as excessive spray problems and uneven spray rates. You want to be aware of your surroundings while spraying foam. For example, on a windy day, you want a wind spray. Be sure to wear the right protective gear when the wind is spraying, as the applicator will be heavily exposed with excess spray. You should also check if the solution blends properly before beginning to implement it.

Prepare An Area: You must install a primer on the surface. Then wrap and hide areas to protect them from excessive spraying, including accessories. You may want to use a metal masking tape to get a clean, sharp end.

You should have no problem applying your polyurea spray coating when you follow these guides. It is better to apply the coating correctly the first time, so you need to be ready and know what you're doing. Let the Polyurea Spray Coating of ArmorThane help you. Contact us to find out more details about our services and products.